The new concept in parking and speed bumps are:

• Much lighter – one man can install

• Passes freeze/thaw testing

• Can be painted any color

• Totally 100% recyclable

• Speed bumps available

• Also used for Traffic Diversion Islands

 

Recommended fastening hardware: 1/2" x 10" lag bolts and flat washers (not provided). Position parking stop as desired. Use a 1/4" drill bit to drill into asphalt through the pre-drilled hole in the parking stop. Use a socket and ratchet, screw the lag bolts snug until the flat washer contacts the plastic inside the pre-drilled holes. Use an exterior construction grade adhesive such as liquid nails (not provided) to fill and level the underside of the parking stop as needed. PLEASE NOTE: Improper installation of the parking stop voids the limited warranty.